Maritime Services is the US distributor for Norac Marine Interior Systems. Norac offers a complete interior soft core paneling system for use on board ships, cruise vessels, drilling rigs, offshore installations as well as onshore hotels, hospitals and industrial plants.

The system combines noncombustible and sound-absorbent elements and has been designed for simple and rapid installation. A wide variety of vinyl finishes as well as stainless and galvanized finishes are available. Norac products are certified by USCG/MED and ABS for shipboard construction and components of structural fire protection.

The Norac system is available in standard modules, semi modulated or fully modulated systems in steel or aluminum with sound reduction up to 48dB.

Maritime Services Corp. can provide full design and engineering for any size Norac project. This includes material takeoffs and joiner engineering.

Maritime Services provides the following Norac System products:

• B-0, B-15, A-60 Walls, Linings & Partitions
• B-0, B-15, A-30 Ceilings
• Inspection Hatches
• A-60 Floating Floors
• Toilet Modules/Wet Units
• Doors

Product name: K-600/25-50

K-600 is designed with integrated joint profiles for rapid installation, leaving a flush surface with single seam joints. Available in standard or modular system.

K-panels are also available in aluminum construction in B-15 with considerable weight savings.

Download K600 standard wall pdf

Product name: Q-600/50-70

Q-600 is an acoustic wall system with an excellent sound reduction quality. Q-600 is a rigid system with integrated joint profiles and allows for easy and rapid installation. Flush surface with single seam joints. Available as a modular system.




Download Q600/CF600 wall pdf

Product name: Danacoustic M

Danacoustic M can be fitted - and refitted as necessary - swiftly and easily with the panels clipping into a carrier system and then secured in place by screws. Again, to facilitate access, each individual panel can be easily removed.

The system fully satisfies all current fire regulations and, although very light has quality sound control properties. It has been used with success on marine vessels, oil rigs and other offshore installations for over 30 years.

The flexibility of the Danacoustic M system can easily contend with a variety of lighting and ventilation systems.

Download PDF-file

Product name: Danacoustic Tiles P-52

There are certain situations where only a tile has the visual and functional qualities required. In these circumstances Danacoustic marine tiles can be specified with confidence, having been approved for use on oil and gas platforms where ratings up to B-0 or B-15 are required.

Norac marine tiles have been chosen for larger areas such as dining rooms, lounges, etc. They have excellent acoustic properties and can be supplied with a plain or perforated face depending on the sound requirements. Perforated - C class only.

Download PDF-file

Product name: Danacoustic Tiles P-31

This type of ceiling is often used in public areas. Norac often delivers the tiles integrated with special beams, domes, etc. The tile system is easy to install, using a conventional T-rail suspension system. Each tile is thus easily removed to allow quick access to the ceiling void. The system is only for areas with C-class.

Download PDF-file

Product name: Danacoustic Tiles P-52

There are certain situations where only a tile has the visual and functional qualities required. In these circumstances Danacoustic marine tiles can be specified with confidence, having been approved for use on oil and gas platforms where ratings up to B-0 or B-15 are required.

Norac marine tiles have been chosen for larger areas such as dining rooms, lounges, etc. They have excellent acoustic properties and can be supplied with a plain or perforated face depending on the sound requirements. Perforated - C class only.

Download PDF-file

Product name: B-500/52

B-500/52 is a self suspended ceiling designed for easy and rapid installation with no connecting profiles.

No additional (loose) insulation required to maintain fire class. Self suspended up to 3000 mm. May be used as component of A-60 Deck.

Download PDF-file

Product name: B-600/40

B-600/40 is a self suspended designed for easy and rapid installation with no connecting profiles. Self suspension up to 2700 mm.

Download PDF-file

For B-500 Ceilings

For quick access to technical spaces above the ceiling such as ventilation, electrical wiring etc. Surface is normally the same as the ceiling to make a discreet finish.

The hatch is supplied with frame / counter frame for cut out, 3-point espagnolet lock and piano hinge.

Download PDF-file

For Danacoustic Ceilings

Danacoustic Hatch / Access panel for ceiling M-300.

The hatch is delivered in sizes, 300x600 mm or 600x600 mm as standard.

Download PDF-file

Product name: F-300

Galvanized steel cassettes of 3 mm thickness. All 4 edges are bent for maximum strength.

To insulate according to A-60 fire class combined with acoustic insulation, the F-300 has proved to be a product preferred by many customers. The conveniently sized system is easily transported and installed. 180kgs/m2 insulation with 3mm galvanized steel sheet top.

Download PDF-file




Sound test Data is available upon request.

When considering prefabricated wet modules onboard a ship, offshore living quarters or even in a building on shore, quality is a key word in every respect. The units from Norac are produced according to the most stringent methods and with an undisputable focus on quality in even the smallest details. A bathroom shall not only be of a durable construction with minimum maintenance cost, but also be a room where the user feels comfortable.

With many years of experience and specialized competence, Norac AS offer fully fitted wet units. The Norac modular wet units are ideal for marine accommodations, from cruise ships to offshore installations.

Choose from standard floor plans or custom configurations and design for a unit to suit all your requirements. Maritime Services is the US distributor of NORAC Toilet Modules.

Download PDF-file

Norac Baggerød AS has a complete range of doors from interior doors to external A-class weather tight doors as and heavy-duty offshore doors of fire class H-120 (hydrocarbon). The range of doors includes most types used onboard marine vessels today and are all tested and approved. In addition Norac Baggerød also manufactures fire-rated windows for offshore application up to fire class H-120.

Specially designed glazed walls and partitions both for internal and external use is another feature of Norac Baggerøds product range. With simple system building, we can offer a flexible product with many applications.

Maritime Services Corp. can provide full design and engineering for any size Norac project. This includes material takeoffs and joiner engineering.

CONTACT: 541-386-1010 | sales@mscor.com | CORPORATE ADDRESS: 3457 Guignard Drive, Hood River, OR 97031